Stagnant-immobilize any animal human or vehicle

Animals always run away from you? This module allows you to fix any animal or human, as well as some vehicles, and then you can do whatever you want.

This mod gives you the ability to fix people, animals and some vehicles so that they will not run away from you or attack you. If the victim is a great ape (animal or human), it will fall to the ground and can do nothing. If the target is a vector, its speed will be greatly reduced (almost 0). Requirements: ScripthookDRD2Alexander Blade (not the one on Nexus): http://www.dev-c.com/rdr2/scripthookrdr2/CommunityScripthookRDR2.NET: https ://www.nexusmods.com/reddeadredemption2/mods/70All other project procedures required by the above two. Installation: Put "HCL_Superpower_07.cs" in the /scripts/ folder of the RDR2 installation folder (if you successfully installed "Community ScripthookRDR2.NET", there should be this folder, if not, you can create one). Control: Press F4 when the target starts to stagnate, press F4 again to stop stagnation. If you do not aim the gun, it is difficult for you to choose a target. In this case, you can hold down the F4 key and a small green box will appear in the center of the screen. You can use this box to select your target and release F4 to start the stagnation period. During the stagnation, hold down F5 to push the target away, hold down F6 to pull the target towards you. Press F7 to directly kill/destroy the target. If the target is an animal and you kill it with F7, and you do not harm it in other ways, then the animal's skin will not be damaged. If the target is a person, you will not lose any reputation, and you will not be wanted. How to customize mod: Open the "HCL_Superpower_07.cs" file with Notepad and all customized content are in "//////////////////////// ///" within the area marked. Follow the instructions. Although they can be used together, if you want to use this module with my telepathy and heat and my blink (telephony) mode, you can find a module in the optional file. Group, combine the three modules in one file for better compatibility. But if you only want two, they can work together without any problems, so you don't have to worry about anything. Come in the optional version, press Shift+Q to switch the static state. You can open the file with Notepad to view detailed information. You can use this module to do whatever you want!